Tips On Doing Your Own Garage Installation
Anyone taking on the job of doing their own garage installation will be faced with a complicated task. A garage door can pose difficulties, due to the way that they are large and heavy. Anyone good at doing work in their home, may come to find the whole process rewarding in the way that it is something they accomplish on their own, as well as allows them to save money.
Safety is something to always consider and means that you should not do this work if the door uses a standard spring system. The only types of doors that you should do yourself is those that use a torsion spring system. Additionally, this is something to keep in mind when you are removing a door as well.
These directions are to help with installing a sectional garage door, but should not replace the directions that came with the door. The very first thing you should do, relates to the application of the weather stripping to the bottom part of the first panel. Place the first panel in place and use something to temporarily keep it there.
In addition, put on the hinges. While you are assembling the tracks, make it is according to the directions that came with the door. The next thing involves putting in the rollers and brackets on the door section, as well as any other brackets that should be installed at this time. You should install the vertical track on the rollers on this portion of the door as well on both of the sides.
The next thing that you do should involve the installation of the rollers onto the second section. Throughout the duration of this next part you should have someone helping you. Have someone help you with the lifting of the next section. Have them help you with setting it in place so that you can put the rollers into that section with the vertical tracks on both sides of the door. Now you are going to want to put the hinges on the first portion of the door onto the second part. After you are done with the first two sections, then you are going to want to start with the third section. The installation of the third section will be much like the other two sections.
Following the third section, check everything according to what the directions say, then you should put the top plates on. You are going to want to attach these to the wall and they are both for the vertical tracks. While you are attaching these, make sure that they are tight enough so that they will not pose a hazard in the future by coming undone.
While you are attaching the other tracks, make sure that it is done loosely. Now put the last section in and make sure to remove any of the nails that you used for temporary support. As long as you are not planning to use an opener, you can install the torque tube. This you are going to want to install according to the directions that you have. Open the door about 4 feet thereafter, in order to check for the alignment of the door. Make any adjustments that are needed, then tighten all of the fasteners.
Want to find out more about Houston Garage Door, then visit Danny Signal\’s site on how to choose the best repair or installation option for your needs.
